Skip to Content

How to Remove Spindle from Tap?

How to Remove a Spindle from a Water Tap: A Step-by-Step Guide

Are you facing a leaky faucet or a tap that just won’t turn off? It might be time to remove the spindle from your water tap for maintenance or replacement. Don’t worry; this task is simpler than it sounds! In this blog post, we’ll guide you through the process step-by-step, ensuring you have all the information you need to tackle this project with confidence. Plus, we’ll highlight some essential tools and products from our catalogue that can make your plumbing tasks even easier.

Why Remove the Spindle?

Before we dive into the how-to, let’s briefly discuss why you might need to remove the spindle. The spindle is a crucial component of your tap that controls the flow of water. Over time, it can wear out, leading to leaks or difficulty in turning the tap on and off. By removing and inspecting the spindle, you can determine if it needs repair or replacement.

Tools You’ll Need

Before you start, gather the following tools and materials:

  • Adjustable wrench or pliers
  • Screwdriver (flathead or Phillips, depending on your tap)
  • Replacement spindle (available in our catalogue)
  • Plumber’s grease (for reassembly)
  • Towels or a small bucket (to catch any water)

Step-by-Step Guide to Removing the Spindle

Step 1: Turn Off the Water Supply

Before you begin any plumbing work, safety first! Locate the water supply valve under the sink and turn it off. If you can’t find it, you may need to turn off the main water supply for your home.

Step 2: Drain the Tap

Open the tap to let any remaining water drain out. This will help prevent spills and make the process cleaner.

Step 3: Remove the Tap Handle

Using your screwdriver, carefully remove the screw that holds the tap handle in place. If your tap has a decorative cap, gently pry it off to access the screw. Once the screw is removed, lift the handle off the spindle.

Step 4: Loosen the Spindle

With the handle removed, you’ll see the spindle. Use your adjustable wrench or pliers to loosen the nut that secures the spindle to the tap body. Turn it counterclockwise until it’s loose enough to remove by hand.

Step 5: Remove the Spindle

Once the nut is loosened, carefully pull the spindle out of the tap body. Be cautious, as there may be some residual water. If the spindle is stuck, gently wiggle it back and forth while pulling it out.

Step 6: Inspect and Replace

Now that you have removed the spindle, inspect it for any signs of wear or damage. If it’s worn out, it’s time to replace it with a new one. Check our catalogue for a variety of spindles that fit your tap model.

Step 7: Reassemble the Tap

If you’re replacing the spindle, apply a small amount of plumber’s grease to the new spindle before inserting it back into the tap body. Secure it with the nut, tightening it with your wrench. Reattach the tap handle and secure it with the screw. Don’t forget to replace any decorative caps.

Step 8: Turn the Water Supply Back On

Once everything is reassembled, turn the water supply back on. Test the tap to ensure it’s functioning properly and that there are no leaks.

Conclusion

Congratulations! You’ve successfully removed and replaced the spindle from your water tap. This simple DIY task can save you time and money, and it’s a great way to maintain your plumbing fixtures. If you need any tools or replacement parts, be sure to check out our catalogue for high-quality products that will make your plumbing projects a breeze.

If you have any questions or need further assistance, feel free to reach out to us. Happy plumbing!


Our latest content

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provide both a filter and a template to use.
How to Remove Spindle from Tap?
Abc, Chintan K C 3 July 2025
Share this post
Archive
Sign in to leave a comment
What is The Standard Spindle Size?